KPT98-IIC Flameproof Pan & Tilt Head (Gas Group-IIA, IIB)

KPT98-IIC Flameproof Pan & Tilt Head (Gas Group-IIA, IIB)

Cat No. KK/PT/A/101-IIC
Type No. KK/FPPT/IIC
Drg No. PT/101/A-IIC
Standards Applied : IS/IEC 60079-0 : 2004
IS/IEC 60079-1 : 2007
IS/IEC 60529 : 2001

Flameproof, Weatherproof Pan & Tilt Head is used in potentially hazardous area for movement of the CCTV camera in its horizontal and vertical plane. Pan & Tilt Head facilitate flameproof enclosure move along with CCTV camera & lens in desired positions to scan the area as required.

Prepositioning & programming is possible with flameproof Pan & Tilt Head. This is an optional facility and can be incorporated only on demand.

 

MATERIAL OF CONSTRUCTION OF THE ENCLOSURE:
LM-6 Aluminium Casting Alloy. Pan Tilt Motors- 2 Synchronous 240V/110V AC 50Hz. Worm and worm wheels with SS shaft, Bearing Blocks, Mounting plates, limit switches. Preset Angle positioning for panning & Tilting is optional and can be incorporated at (extra cost) the initial stages of production.

Specifications :

Panning Angle /350 Degrees Adjustable
Tilting Angle + – /90 Degrees Adjustable
Pan Movement /6 Degrees per Sec
Tilt Movement /6 Degrees per Sec
Over Run None
Back Lash /5 Degrees Maximum
Load carrying Capacity Two Snc. Motors 28 Kg. CM Torque per Motor
Maximum Power Consumption 120 Watts
Mounting Facility Platform of any design can be fixed to suit mounting of Flameproof Enclosure
Self–Weight of the Machine 50 Kg
Optional Preset Positioning Facility Available

Overall Assembly Dimensions :

Height 425 MM
Weight 320 MM
Depth 340 MM
Width With Platform 625 MM

CERTIFICATIONS BY : KLPL, BIS(ISI MARK), PESO(CCOE)

</p>