Water/Air Cooled Housing For Cctv Camera & Lens

Model: WCJ03 (New)
WATER/AIR Cooled Housing

Specifications:

Material of Construction: SS sheets of 10, 14 & 19 SWG in 304 grade

Nozzles, Pipes, in SS 304 grade,

Rubber Hose for Water & Air circulation suitable for Water and Air Pressure up to 4.5Kg/cm2. Rubber Hoses in ½” & ¼” to withstand Temperature up to 120º C (See attached table below)

Air Purging System Nozzle is provided.

Toughened glass 150 MM Dia. X 10 mm thick

Gasket on front & rear flanges between the BODY and the Covers.

Degree of Protection IP: 65 as per IS: 13947 (part-I) 1993

Cable Entry from rear flange Cover is provided.

 

Ambient Temp. in ºC Where HOUSING is installed	TempERATURE IN ºC Inside HOUSING	Input WATER/AIR Temp.ºC
{Area 1}    120	Up to     40	Less than 5
{Area 2}    100	Up to     40	Less than 15
{Area 3}     80	Up to     40	Less than 20
{Area 4}     65	Up to     40	Maximum   30

 

Overall Dimensions:

Front 220 mm X Rear 220mm X Over all Length 550 mm

Inner shell Ø150-mm,   Mid Shell Ø 190–mm,

Height from the Ground level 250mm

 

 We are offering following with the Air/Water cooled Housing

 

WATER/AIR  Cooled Housing in SS 304 Grade for ambient temperature up to 120Deg. Centigrade  

IP: 65 protection.  

 

Air purging arrangement, with  maximum pressure of 2.5KG/CM2.

 

Provided with the WATER/AIR cooled housing are Inlet, Outlet Hoses and Air Hose attached to Air Purging Nozzle.

 

Digital  Temperature Indicator along with Temperature Sensor. This  will Monitor Temperature inside the Cooled Housing.  This is set at 40 Deg. Cent.